FPV 2-Axis Brushless Camera Gimbal w/ Motor & Controller for DJI Phantom Gopro 3
Project Review - Value for money brushless gimbal
Synopsis: We have been looking for a quality gimbal for aerial
filming, to allow us to survey an area with camera stabilization. There are probably over
20 selections of gimbals out in the market, notably the
expensive Dji Zenmus and Tarot gimbals.
We wanted a gimbal that has a motion processing unit to stabilize our camera
while in flight. Working with Hobbywow.com,
we have decided to test this unbranded but
quality gimbal to see how it fair. We selected the FPV 2-Axis
Brushless Camera Gimbal w/ Motor & Controller for DJI Phantom Gopro 3. This
selection is based on the budget price, it's stand-alone built ready to use controller that can
be installed on any aircraft with any light weight pocket camera, the GUI software SimpleBGC and performance.
As usual, we like working with Hobbywow, as their customer service has been
excellent to help answer any questions we may have.
More videos and test to
•Simple structure and light weight CNC aluminum alloy structure
•Brushless motor direct drive
•With anti-vibration rubber balls
•With 2 x 2208 motors and gimbal controller sensor installed
•With motor protector which can help heat dissipation
•Weight is about 212G, total weight with GOPRO3 is about 285G.
Notes: the PCB has five pins but the cable only has
four. Use the program SimpleBGC GUI v2.2 b2. SimpleBGC_GUI_2_2b2
If the Pitch gimbal should become disconnected, remember there only 4 wires, red
power supply goes all the way to the extreme left marked with a white dot.